Publicité
Les langues disponibles
Les langues disponibles
EN
Adjust Brightness and Flashlight Mode
1. To set task light, position directional switch to neutral.
2. Pull trigger to cycle through brightness options or to turn off light.
3. Position directional switch to Forward or Reverse to save desired brightness setting and begin tool use.
Refer to illustration #2 on page 2.
NOTICE
While in neutral, tool will remain in task light mode for 10 minutes.
Parts and Maintenance
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand office or distributor.
Environmental Protection
When life of Ingersoll Rand electrical product has expired, it must be recycled in accordance with all applicable standards and regulations (local,
state, country, federal, etc.). Improper disposal may endanger environment.
Symbol Identification
Li-Ion
Risk of explosion.
Return waste material for
Do not dispose of this product
Product contains Lithium-Ion.
Follow all safety procedures
recycling.
with household waste material.
Do not dispose of this product
for use.
with household waste material.
Original instructions are in English. Other languages are a translation of the original instructions.
EN-3
47610296001_ed3
Publicité
