Installing The Support For Heating Elements - Helo ROCHER DE Manuel Produit

3.8 Installing the support for heating elements: Pile in stones up to halfway of the provided space. Position
the support so that the heating elements stay between the openings. Tilt the support and press the pivots at
each end of the support to the grooves in the inside of the heater's vertical beams, one end at a time. The
support for heating elements should stay levelled.
Position the support between the
heating elements.
Push the pivots at one end of the
support to the grooves in the
vertical beams.
Press the pivots at the other end of
the support to the grooves in the
heater's vertical beams.
Subsequently, pile in stones up to
the upper edge so that they cover
the heating elements.
13