Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ANALOG OUTPUT
RCA
BALANCED
8
8. ANALOG OUTPUT:
analogue audio signal outputs
Either the RCA connector pair or the XLR socketss
("BALANCED") must be connected to the corre-
sponding input of the amplifier, preamplifier etc.
9. LAMP: Dimmer for the tube illumination
The setting of this switch affects the brightness of
the illumination of the tube display window (5).
10. POWER CONTROL (12V)
These jack connectors (3.5 mm) send the signals
for the standby control (12V Trigger).
11. DIGITAL IN:
USB: input connector
Here you can connect a PC, laptop etc. by a USB
B/A cable.
Vincent
28
REAR VIEW
LAMP
DIGITAL INPUT
BALANCED
INPUT/EXIT
10
9
11
DIGITAL INPUT
DIGITAL INPUT
AES/EBU
COAXIAL 2
COAXIAL 1
USB
OPTICAL 2
12
12. DIGITAL IN:
AES/EBU + Coaxial 1 & Coaxial 2
Connections for audio signals of source devi-
ces with digital sound such as, for example,
DVD players. "Coaxial" for connection via
coaxial cable and "AES/EBU" via symmetri-
cal XLR cable.
13. DIGITAL IN:
Optical 1 / Optical 2
Connections for audio signals of source devices
with digital sound via optical fibre connection.
14. Voltage Selector:
The voltage selector behind the pane allows swit-
ching the voltage from 230 V to 110 V.
Refer to safety instructions for further information
(p. 32, "Switching the Voltage")
15. AC 220-240V: Power Connector
To establish the power supply, connect the plugs
of the power cable to the device and to a suitable
wall outlet.
OPTICAL 1
14
13
~115V: FUSE T1AL 250V
~230V: FUSE T500mAL 250V
15
Publicité
Table des Matières
