SAFETY WARNINGS FOR INSTALLATION AND USE
These warnings are an essential, integral part of the product and must be given to the user. They provide
important indications on the installation, use and maintenance and must be read carefully. This form must be
preserved and passed on to subsequent users of the system. The incorrect installation or improper use of the
product may be dangerous.
INSTALLATION INSTRUCTIONS
The installation must be performed by professionally skilled personnel and in compliance with current local, state,
•
national and European legislation.
Before beginning the installation, check the integrity of the product.
•
The laying of cables, electrical connections and adjustments must be workmanlike performed.
•
The packing materials (cardboard, plastic, polystyrene, etc.) are a potential hazard and should be disposed of
•
correctly and not left within reach of children.
Do not install the product in potentially explosive environments or environments disturbed by electromagnetic
•
fields. The presence of inflammable gases or fumes is a grave danger to safety.
Set up a safety device for overvoltage, a disconnecting and/or differential switch suitable for the product and
•
conforming to current standards.
The manufacturer declines any and all responsibility for product integrity, safety and operation in the event
•
incompatible devices and/or components are installed.
Solely original spare parts should be used for repairs and replacements.
•
The installer must provide all the information relative to the operating, maintenance and use of the individual
•
components and the complete system as specified in the MACHINE LEGISLATION (see regulations EN 12635,
EN 12453 and EN 12445).
MAINTENANCE
To ensure product efficiency, it is essential that professionally skilled personnel carry out maintenance within the
•
times established by the installer, the manufacturer and by current legislation.
All installation, maintenance, repairs and cleaning operations must be documented. This documentation must be
•
preserved by the user, and made available to the personnel responsible for the control.
WARNINGS FOR THE USER
Read the instructions and enclosed documentation carefully.
•
The product must be used for the express purpose for which it was designed. Any other use is considered
•
improper and therefore hazardous. In addition, the information given in this document and in the enclosed
documentation may be subject to modifications without prior notice. It is given as an indication only for product
application. Prastel declines any responsibility for the above.
Keep products, devices, documentation and anything else provided out of reach of children.
•
In the event of maintenance, cleaning, breakdown or faulty operation of the product cut off the power and do not
•
attempt to operate on the product except when indicated. Contact professional personnel, competent and
suitable for the task. Failure to adhere to the above indications may be dangerous.
WARRANTY LIMITS
The warrantee is valid for 24 months from the date indicated in the sales document and its validity is limited to the original purchaser. It does not cover the following eventualities:
negligence, incorrect or improper use of the product, use of accessories not conforming to the manufacturer's specifications, tampering by the customer or third parties, natural causes
(lightning, floods, fire, etc.), riots, vandalism, modifications to the environmental conditions of the installation site. Nor does the warranty cover parts subject to wear (batteries, oil etc.).
Products returned to PRASTEL. for repair shall only be accepted carriage paid. Prastel shall return the repaired product to the sender carriage forward. Otherwise the goods will be
refused on receipt. The purchase of the product implies the full acceptance of all the general terms of sale. Any dispute shall be submitted for judgement to the Court of Marseille -
France.
15