Monacor DAC-199 Mode D'emploi page 15

6.4 Use as a door opener
To open the door, enter the code number and press
the key . The correct code number is confirmed by
a beep tone of several times and the door is opened.
If a wrong code number has successively been
entered for three times, it must be waited for 60
seconds until it is possible to try again.
6 Specifications
Power supply: . . . . . . . . . . 8-13.8 V
Power consumption
Standby: . . . . . . . . . . . . 8 mA
Relay active: . . . . . . . . . 45 mA
Relay contact: . . . . . . . . . . 1 x SPDT (NC/NO),
Anti-tamper contact: . . . . . Normally closed (NC)
Operating temperature: . . . 0-40°C
Dimensions (W x H x D)
DAC-199: . . . . . . . . . . . 76 x 104 x 37 mm
DAC-299: . . . . . . . . . . . 84 x 134 x 44 mm
According to the manufacturer.
Subject to technical change.
1 A max.
GB
15