Supertech Agroline Farmpoint Notice D'utilisation page 7

1
Note: In order to ensure correct measurements, clean your device thoroughly with the enclosed
cleaning brush after each measurement.
Note: If the temperature of the grain sample differs a great deal from that of the result in the
unit, e.g. measurements taken directly from the dryer, it is recommended to preheat the tester
as follows:
1. Fill the test cell with the desired crop, wait 1-2 minutes before compressing and the press the
'ON-TEST' button
2. Read the results on the result screen
Ver 1.1.0
2 3 4
GB
Page 7/13