Quick Guide To Display Messages; Technical Specifications; Troubleshooting - Supertech Agroline Farmpoint Notice D'utilisation

Quick Guide to Display Messages

Symbol:
*
Temperature ++
Temperature --
Hi
Lo
Change battery
Technical Specifications
●
Measuring range (Moisture): 5 to 45% Depending on crop type
●
Operating range (Temperature): 0 to 50 ºC
●
Resolution: 0.1% moisture
●
Temperature compensation: Automatic
●
Weight including case: 1.5 kg
●
Dimension: 21 x 7,5 x 7,5 cm
●
Battery: 9 V Alkaline
●
Display: 2 line LCD
●
Accuracy: Better than +/- 0.5% in normal moisture range, by using average and
calibration adjustments

Troubleshooting

➢ The meter does not start at press ON/TEST button
Change the battery. It is a good idea to always have a new battery in your carrying-case
➢ The meter shows Lo<xx% in the display
The moisture content of the sample in the measuring cell is below the measuring range
➢ The meter shows Hi>xx% in the display
The moisture content of the sample in the measuring cell is over the measuring range
➢ The meter shows other values compared to official certified meters
Calibrate the tester as explained in the section "Adjusting the calibration of the meter"
Ver 1.1.0
Definition:
Calibration has been adjusted from the factory setting for the crop being displayed.
Grain temperature is above the upper operating limit (50°C).
Grain temperature is below the lower operating limit (0°C).
Grain moisture content is above the upper limit (varies with crop).
Grain moisture content is below the lower limit (varies with crop).
Battery needs replacing.
GB
Page 12/13