Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell P1cc Notice D'emploi

2.3 Technical data

Universal motor, radio and TV interference
suppressed
Input power continuous operation
Idling stroke rate
Length of stroke/working stroke
Cutting speed at normal load
Cutting depth
Weight without mains cable
Diameter hose connector (outside ø)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-11:
Idling
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm-vibration is 5.7 m/s

2.6 Scope of supply

Precision jig saw P1cc complete with:
1 selection of jigsaw blades
1 hose connector
1 chip deflector
1 splinter guard
1 glider
1 carrying case
1 operating manual
1 folder "Safety Instructions"

2.7 Safety devices

Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
The machine is equipped with the following safety
devices:
Sound power level
97 dB (A)
98 dB (A)
(224.4 in.) for wood and 5.6 m/s
2
230 V~, 50 Hz or 110 V~, 50 Hz
900 W
800 - 3000 rpm
26 mm (1.02 in.)
0.4 – 1.3 m/s (15.74 - 51.18 in./s)
65/115 mm (2.56/4.53 in.)
2.5 kg (5.51 lbs)
29 mm (1.14 in.)
Workplace-related emission value
86 dB (A)
87 dB (A)
- Large base plate
- Saw blade contact protection
- Handles
- Index mechanisms

2.8 Use according to intended purpose

The precision jig saw is exclusively intended to be
used to cut solid wood and panel materials such as
chip board, coreboard and MDF board, synthetic
materials, mineral building materials and metals.
-18-
(220.4 in.) for metal.
2