Publicité
Les langues disponibles
Les langues disponibles
1
THE HOLES CENTER DISTANCE HAS TO BE
!
TRANSMITTED TO THE BOILER'S MANUFAC-
TURER WHEN PLACING THE ORDER (USE
THE DISTANCE IN THE PICTuRE 3)
2.
Slacken the 2 screws of the support jig (pic.2) and remove it
from the back part of the module.
4
2204010 - 05.13
3. Installation on the puffer
!
1.
Pull out the module from the package and remove the cover.
ATTENTION!
4.
remove the EPP inserts for the hydraulic connection
as indicated in the picture
3.
Hook-up the module to the screws – Hook the module
up to the screws of the puffer (see slot on the back) and
Screwing the screws as indicated in the picture 5.
Assembling instructions and maintenance
ATTENTION!
HANDLE IT WITH CARE!
2
3
5
16
Publicité
