VitalWatch Bioresonance i-like Mode D'emploi page 75

Set the time:
Pull crown out to position II (watch is stopped). Turn the
crown until the current time is displayed (remember the 24-
hour cycle). Push crown back into position I.
Quick-change correction for date:
Press pusher A, until the current date is displayed
(remember the blocking period).
During the blocking time from approx. 11.30 pm – 5.30 am,
no day dates can be changed using the pusher, because
during this time automatic changes are in progress.
Pressing the pusher during these times may damage the
movement.
Correction for the day of the week:
Press pusher B, until the current day of the week is diplayed
(remember the blocking period).
VitalWatch ®
75