Storage, Cleaning; Disposal; Notes On The Guarantee And Service Handling - Crivit 292789 Instructions D'utilisation

Trottinette à grandes roues
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Rollers wear down. This wear depends on many
factors, such as the ground, size and weight of
the user, weather conditions, and the material
and hardness of the rollers. They therefore occa-
sionally need to be replaced.
1. Loosen the axle bolts (17) using two size 5
socket head wrenches.
2. Remove the axle bolts and remove the roller.
3. Install the new roller (18) and secure with the
axle bolts.
After replacing:
Do not use if the roller grinds against the side
after replacing!
Verify all screws are still tight after the first few
minutes of riding and nothing has detached or
loosened.
Retighten the roller to ensure it runs smoothly and
the bearings are silent.
Replacing the ball bearings (Fig. J)
1. Replace the roller (18) as described in section
„Replacing the rollers".
2. Carefully pry out the respective bearing (20)
using a socket head wrench.
3. Remove the spacer (19) from the roller and
turn it over.
4. Prey out the other bearing using a socket
head wrench.
5. Push in a new bearing. Turn the roller over,
insert the spacer, then push in a second new
bearing.
6. Reattach the roller as described in section
„Replacing the rollers".

Storage, cleaning

We recommend thoroughly cleaning and drying
the product after use.
Remove small stones or other objects which may
be stuck to the rollers. Dry wet or damp ball
bearings with a clean cloth. Grease the bearings
with suitable bearing grease from the outside to
prevent rust forming on the outside.
Always store the product in a dry location.

Disposal

Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the pack-
aging materials out of the reach of children.
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory guar-
antees or through goodwill do not extend the
warranty period. This also applies to replaced
and repaired parts. Repairs after the warranty
are subject to a charge.
IAN: 292789
Service Great Britain
Tel.:
0871 5000 720
(£ 0.10/Min.)
E-Mail: deltasport@lidl.co.uk
Service Ireland
Tel.:
1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: deltasport@lidl.ie
GB/IE/NI
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bw-4534

Table des Matières