Storage, Cleaning; Disposal; Notes On The Guarantee And Service Handling - Crivit 327440 1904 Notice D'utilisation

1. Loosen the axle bolts (17) with two size 5
Allen keys.
2. Pull out the axle bolts (17) and remove the
wheel (18).
3. Install the new wheel (18) and secure it with
the axle bolts (17).
After replacing the wheels:
Do not use the wheels if they pull side-
ways after replacing them! After the
first few minutes of riding, make sure
that all screws are still tight and that
nothing has detached or become loose.
Tension the wheel once more to make
sure that it is running quietly and that
the bearing isn't making any noise.
Replacing the ball bearings
(Fig. H)
1. Remove the wheels (18) as described in the
section "Replacing the wheels".
2. Use an Allen key to lever out a bearing (19).
3. Remove the spacer (20) from the wheel (18)
and turn it over.
4. Lever out the other bearing (19) with an Allen
key.
5. Press in a new bearing (19). Turn the wheel
(18) over, insert the spacer (20) and then
press in a second new bearing (19).
6. Secure the wheel (18) again as described in
the section "Replacing the wheels".

Storage, cleaning

We recommend that you clean and dry the item
thoroughly after use.
Remove small stones or other objects that may
have got caught on the rollers. Dry wet or damp
ball bearings with a clean cloth. Grease the
bearings with a suitable bearing lubricant from
the outside to prevent external rust. Always store
the item in a dry place.

Disposal

Dispose of the article and the packaging
materials in accordance with current local
regulations. Packaging materials such as foil
bags are not suitable to be given to children.
Keep the packaging materials out of the reach
of children.
8 GB/IE/NI
All manuals and user guides at all-guides.com
Dispose of the products and the packaging
in an environmentally friendly manner.
The recycling code is used to identify
various materials for recycling.
The code consists of the recycling symbol
– which is meant to reflect the recycling cycle –
and a number which identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory gua-
rantees or through goodwill do not extend the
warranty period. This also applies to replaced
and repaired parts. Repairs after the warranty
are subject to a charge.
IAN: 327440_1904
Service Great Britain
Tel.: 0800 404 7657
E-Mail: deltasport@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: deltasport@lidl.ie