Table des Matières
Publicité
:
Caractéristiques
Substrats :
- Fe-probe: iron or steel
- NFe-probe: non-ferrous metallic substrates i.e.
aluminum, zinc, copper, brass,
stainless steel
Capacité de mesures :
- Fe-probe: 0-2mm or 0.00-80mil
- NFe-probe: 0-800μm or 0.00-32mil
Display of measured values
- Fe: from 0.0-999 in μm
from 1.00-2.00 in mm
or
from 0.00-80 in mil
- NFe: from 0.00-800 in μm
or
from 0.0-32 in mil
Résolution :
- Fe: 0.1μm in the range of 0.0-99.9μm
1μm in the range of 100-999μm
0.01mm in the range of 1.00-2.00mm
or
0.01mil in the range of 0.00-9.99mil
0.1mil in the range of 10.0-80,0mil
- NFe: 0.1μm in the range of 0.0-99.9μm
1μm in range of 100-800μm
or
0.01mil in the range of 0.00-9.99mil
0.1mil in the range of 10.0 - 32mil
Précision :
±(1.5 μm + 2%) or ±(0.06mils + 2%)
Minimum object size
10 x 10mm or 0.4" x 0.4"
Epaisseur minimum du substrat :
- Fe: 0.20mm or 8mil
- NFe: 0.05mm or 2 mil
6 Avenue Charles de Gaulle – 93421 VILLEPINTE Cedex – TEL : 01 49 63 16 30 – FAX : 01 49 63 19 18
E-mail : someco@someco.fr – www.someco.fr
10
Publicité
Table des Matières
