9.5 Cleaning the inside of the fire box
Daily or before each ignition, it is necessary to
check that the burn pot is clean to ensure the
free flow of combustion air from the holes of the
burn pot itself.
Vacuum out the ash that has accumulated in the
burn pot (Fig. 27).
Remove the ash from the combustion
chamber as the salts present cause
corrosion of the metal. In addition, the
ash could block the passage of air, var-
ying the development of the flame
which, if it approaches the glass, would
increase corrosion.
After cleaning the burn pot, remove it from its
housing and clean the space where it is con-
tained (Fig. 27).
If necessary, remove the ash drawer and empty
it, making sure to remove any residue in the
compartment where it is contained (Fig. 28).
Using an ash vacuum can simplify the
cleaning operations
004778620 - 23/11/2020
ITALIANO
ENGLISH
Fig. 27
DEUTSCH
òòlòòòòPulPip
lllllll
ff
9.6 Cleaning the fan grille
It is recommended to carry out cleaning with the
stove switched off and cold.
Vacuum the fan grille located at the base of the
stove (Fig. 29).
FRANÇAIS
ESPAÑOL
Fig. 28
Fig. 29
61