2
SAFETY WARNING
2.1
Warnings for the installer
Observe the prescriptions contained in
this manual.
The instructions for assembly
and disassembly of the appli-
ance are reserved for specialist
technicians only.
The installation, use and maintenance
of the product must be in accordance
with the manufacturer's instructions
and in compliance with the regulations.
Failure to comply with the instructions
and any incorrect operations may give
rise to hazardous situations, damage to
property, animals, health problems or
malfunctioning.
Installation, electrical connection, oper-
ational testing and maintenance must
be carried out exclusively by authorised
and qualified personnel.
The installation and maintenance of the
product must be carried out exclusively
by qualified personnel with suitable
knowledge of the product itself. Use
only original spare parts recommend-
ed by the manufacturer.
Responsibility for the works carried out
in the location of the appliance is, and
remains, with the user; the latter is also
responsible for carrying out the checks
relating to the proposed installation
solutions.
The installer must comply with all
local, national and European safety
regulations.
The appliance must be installed on
floors with adequate load bearing
capacity.
004778620 - 23/11/2020
ITALIANO
ENGLISH
DEUTSCH
Check that the chimney flue
and air inlet set-ups conform to
the type of installation.
Do not carry out on-the-fly electrical
connections with temporary or uninsu-
lated cables.
Check that the earthing of the electri-
cal system is efficient.
Before starting the assembly or dis-
assembly phases of the appliance,
the installer must observe the safety
precautions required by law and the
following indications in particular:
• do not operate in adverse conditions;
• the installer must operate in perfect
psychophysical conditions and must
check that the personal protective
equipment is intact and functioning
perfectly;
• the installer must wear safety gloves
and shoes;
• they must use tools with electrical
insulation;
• they must make sure that the area
used during assembly/dismantling is
free from obstacles.
The product must only be installed in
rooms that are not at risk of fire and
equipped with all the necessary servic-
es including air and electrical supplies
and flue gas exhausts.
Evaluate the static conditions of the
surface bearing the weight of the prod-
uct and provide suitable insulation if it
is composed of flammable materials
(e.g. wood, carpet, plastic).
Live electrical parts: power the prod-
uct only once it has been completely
assembled.
FRANÇAIS
ESPAÑOL
39