Maintenance / Cleaning; Ec Declaration Of Conformity - ophelis CN Serie Dokumentation Technique / Mode D'emploi

Maintenance / Cleaning

· The control unit and the handset should be cleaned with a
dry or slightly moistened cloth only. Always disconnect the
main power plug prior to cleaning!
· The motors are maintenance-free.

EC Declaration of Conformity

We herewith declare that the device named below, in the
version put on the market by us, is in conformity with the EC
Directives listed below. This declaration becomes null and
void if the device is modified without our approval or is not
used as intended.
Device Name:
CN Series sitting-standing workplaces
Applicable EC Directives:
Machine directive 2006/42/EC
Low voltage directive 2006/95/EC
EMC directive 2004/108/EC
Applicable European Standards:
· DIN EN ISO 12100
Safety of machinery
General principles for design, risk assessment and
risk reduction
· DIN EN ISO 12100 - 1/2
Safety of machinery - basic principles, general
principles for design
· EN 349
Safety of machinery - minimum gaps to avoid crushing of
parts of the human body
ophelis Technical Documentation and Operating Instructions for CN Series Sitting-Standing Workplaces
· The remaining components can be cleaned with commer-
cially available non-abrasive cleaners (observe instruc-
tions for use). Do not allow liquids to penetrate into the
desk legs / column.
· DIN EN 60950-1
Information technology equipment - safety -
Part 1: General requirements
· DIN EN 527-1, 2, 3
Office furniture, office desks
· DIN Fb 147
Requirements and tests of office furniture - guideline
for the security requirements on work tables and storage
furniture in Germany
· DIN EN 55014-1/2
Electromagnetic compatibility - requirements for house-
hold appliances, electric tools and similar apparatus
· DIN EN 61000-3-2/3
Electromagnetic compatibility (EMC);
Part 3: Limits
21