ophelis CN Serie Dokumentation Technique / Mode D'emploi page 17

5. Saving the highest and lowest position of the table
· Move the table top to the lowest position (sitting height
/ Container Stop) or to the highest position (standing
height / Shelf Stop).
· Press S if you have a switch with a memory function
(simultaneously press the UP and DOWN buttons on a
switch without a memory function). S - will be shown
on the display.
· Press the UP button within 5 seconds and hold for at
least 5 seconds.
6. Deactivating the highest and lowest position of the table
· Move the table top to the lowest position (sitting height
/ Container Stop) or to the highest position (standing
height / Shelf Stop).
· Press S if you have a switch with a memory function
(simultaneously press the UP and DOWN buttons on a
switch without a memory function). S - will be shown
on the display.
· Press the DOWN button within 5 seconds and hold for
at least 5 seconds.
(Raise 2nd motor group of desk / UP)
(Lower 2nd motor group of desk / DOWN
Position buttons 1 / 2
Fig. Memory switch
ophelis Technical Documentation and Operating Instructions for CN Series Sitting-Standing Workplaces
7. Saving further table top positions (for Memory function)
· Move the table top to the desired position. The position
will be shown on the display.
· Press the memory button („S"). S - will be shown on
the display.
· Press one of the position buttons (e.g. 2) to save the
position. S 2 will be shown on the display.
· The saved table top position will be displayed after
approx. 2 seconds.
8. Apply saved settings (for Memory function)
· Press the desired position button (e.g. 2) and hold until
the saved height is reached.
· The table top will move until the saved position has
been reached.
· If you release the button before the saved table top
position has been reached the movement will stop
before the desk reaches the saved position.
Display overview
memory button
position buttons 3 / 4
Raise desk / UP
Lower desk / DOWN
17