Schneider LD49-SCE68SK Manuel D'utilisation page 70

Menu Operation
function while in recording mode.
– Schedule Recording
The unit is able to do schedule recording when TV is turned on or in standby mode.
 Press LIST button to bring up Program Guide menu.
 Then press red button will active timer recording submenu. You can set up time
and record mode in the menu.
 Press ▲/▼ button to highlight different setting and press ◄/► button to change
setting. After you have finished adjusting settings to desired options, press the OK
button to save the scheduled recording.
NOTE:
 You can set up several schedule programs to record. To do this you will need to
press the yellow button in the LIST mode which will show you the entire list.
Different schedules should not overlap and there must be at least a 1 minute time
gap to set up between two schedules.
 When recording starts in standby mode, the front indicators will change color and
there will be no picture or sound from the unit. You can press
on the screen.
 Playing the Recorded Programmes
Option1:
Access to your private videos recording, press the MENU ( ) button on the remote
main menu, press arrows button to highlight Option menu and press the OK/►
button; then press ▲/▼ buttons to select PVR File System (In DTV mode), then
press the OK button to go into submenu.
 Press the ▲/▼ buttons to select the Record list.
 Use the ▲/▼
full screen mode.
 Press the RED button to delete the file you no longer require.
 Press the GREEN button to select ascend or descend page.
 Press the YELLOW button to sort programs.
 Press the MENU ( ) button to return to the previous menu.
Option2:
Also you can play the recorded programmes in USB mode.
 Press (HOME) button to enter the Smart Home interface.
 Use the ◄/► buttons to select Media, and then press OK.
 Use the arrow buttons and OK button to enter the desired disk.
 Use the arrow buttons and OK button to open the folder (_MSTPVR).
 Press the MENU ( ) button to display the setting menu.
 Press the
 Press the EXIT (
 Time Shift Function
This function allows the TV to automatically record live TV and make it available for
viewing at any time. With the Time shift turned on, you may rewind normal TV
viewing at any time without missing any of the live broadcast.
Press the II button on the remote control to activate Time Shift function. The TV
stores the channel from the point of view you want to record.
buttons to select a recorded file and press OK to start playback in
button to stop the playing file.
) button to return to the USB main menu.
25
button to turn