Assembling The Stand - Schneider LD49-SCE68SK Manuel D'utilisation

Assembling the stand

NOTE:
*Assure the AC cord is not connected to an AC outlet.
*Before beginning this process, make sure that you have a clean, safe, and cushioned
space to work at to avoid any damage to the unit.
*Do not touch or press the TV screen, the glass might break under pressure.
1.Carefully place the TV screen face-down on a clean, cushioned surface.
2. Insert and secure the stands (R and L) with 3 screws (supplied) each side as
shown.
3. Be sure to follow the above instructions. Insufficient tightening or incorrect installation
of the stand will not support your TV correctly, and could result in damage or injury from
tip-over.
iUse standard M4*25mm screws (4 pieces, not included) to mount this TV. Using
different screws as specified will damage the wall mounting support and will be
outside the scope of product guarantee.
The TV can be mounted on a wall using a 300mm x 300mm VESA kit sold separately.
Mount the TV according to the instructions supplied with the kit. Beware of electrical
cables, gas and water pipes in the wall. In case of any doubt, please contact a qualified
installer.
Contact the store where you purchased the product for information on where to
purchase the VESA kit.
Stand Installation
Wall Mounting the TV
4