Schneider LD49-SCE68SK Manuel D'utilisation page 60

Menu Operation
• DTV Manual Tuning: Manual store for digital channels.
Frequency, Symbol and Modulation values are needed in
order to add a programme correctly in DVB cable mode.
Please inquire of the cable service provider about the
correct values. When setting is completed, select Search
and press the OK button to start channeltuning.
※ When TV signals is Satellite.
• Auto Tuning: Press the OK button to entersub-menu.
– Country: Press the ▲/▼ button to selectcountry.
– Search: Press the OK button to enter searchsettings.
• Satellite: Press the ▲/▼ button to select thesatellite.
• Transponder: Press the ▲/▼ button to select thetransponder.
• Scan Mode: Press the ▲/▼ button to select the scanmode.
• Service Type: Select the service type tosearch.
• Scan Type: Press the ▲/▼ button to select FAST SCAN or BLINDSCAN.
• Search: When you are satisfied with your setting, press the OK/► button. The
TV will begin memorizing all of the availablechannels.
• Sa tellite Se ttings
– Satellite/Transponder: Press the ▲/▼ button to select
the Satellite/Transponder and press the OK/► button.
Press the ▲/▼ button to select the satellite/transponder
from thelist.
– LNB Power: Select the power supply type for theLNB.
– LNB Type: Select the LNBtype.
Press the OK button access the submenu. Items can be
adjusted when the LNB Type is set to Universal Mode.
– 22kHz Tone: 22KHz SWITCH. Select the 22KHz
depending on the LNBtype.
– Toneburst: You can choose one of two satellites.Used
to choose proper device.
– DiSEqC1.0: You can choose one of four satellites. Used to choose properdevice.
– DiSEqC1.1: You can choose one of sixteen satellites. Used to choose proper
device.
– Motor: Sets the positioned type between DiSEqC1.2 andDiSEqC1.3.
When motor is set to DiSEqC1.2 or DiSEqC1.3:
Set position: Press the red button to set position.
Move Auto: Rotates the antenna automatically.
Move Continue: Rotates the antenna until the rotation has been completed or
stopped manually.
Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a finer adjustment.
Store Position: Store current position as the selected positioner limit.
Goto Position: Rotates the antenna to the stored satellite position.
Goto Reference: Drive antenna to zero position.
15
DTV Manual Tuning
Search
Frequency
394000KHz
Symbol
Modulation
DTV
Radio
Data
Bad Normal
Quality
Strength
Back Adjust
Satellite Settings
Satellite
ASTRA1H1KR1L1M
Transponder
10729 V 22000
LNB Power
LNB Type
Universal
22KHz Tone
Toneburst
DiSEqC1.0
DiSEqC1.1
Motor
Single Cable
Bad Normal
Quality
Strength
Auto
Auto
0
0
0
Good
Move
13/18V
Auto
None
None
None
None
None
Good