Schneider LD49-SCE68SK Manuel D'utilisation page 67

Menu Operation
 Connecting to a WirelessNetwork
You can connect your TV to your LAN through a standard wireless router or modem.
TheModemPortontheWall
Wireless Network Configuration
Most wireless network systems incorporate a security system that requires devices
that access the network through an access point or wireless router (typically a
wireless IP Sharer) to transmit an encrypted security code called an access key.
Wireless Network Setup
– How to set up Wifi
1. Turn on your TV, press the MENU
buttons to select Network, and then press the OKbutton.
2. Press the ▲/▼ button to select Network, and then press the ◄/ ► button to
select Wifi .
3. Select Wifi Config. Then press the OK button to enter the menu of the next
level.
4. Select Base Station
for available wireless networks. When done, it displays a list of the available
networks.
5. In the list of networks, press the ▲/▼ button to select a network, and then press
the OK button.
6. On the Please Enter screen, enter your network's Password. To enter the
Password, follow these general directions:
Press the OK button to display the keyboard at the screen.
Use the direction buttons to select the
case, uppercase.
Use the direction buttons to select the
special symbols, numbers andletters.
To enter a letter or number, move to the letter or number, and then press the OK
button.
To delete the last letter or number you entered, Use the direction buttons to
select and pressOK.
Press EXIT
)
7. Input the correct Password and select the
connect the network.
Wireless IP sharer
(AP having DHCP server)
LAN Cable
then press the
) to close thekeyboard.
The TV with Built-in Wireless
) ) button on your remote, use the ▲/▼
OK button. The Network function searches
and press OK to cycles through lower
and press OK to cycles through
Connect and press the ENTER button to
22