Ottobock 1E90 Sprinter Instructions D'utilisation page 14

Connecting component
4R206 TF Test Sport Foot Adapter
4R204 TF Definitive Sport Foot Adapter
5.4 TT Alignment Recommendations
For a TT fitting the prosthetic foot is connected to the prosthetic socket by
means of the suitable adapter.
► Assemble the prosthetic foot according to the mounting instructions for
the selected adapter.
Connecting component
Posterior connection
4R210 TT test sport foot adapter
4R208 TT definitive sport foot adapter
4R420 posterior connection plate
(set)
Distal connection
2R176 T-adapter
2R177=5 5° L-adapter
2R177=18 18° L-adapter
6 Cleaning and Care
1) Clean with a damp, soft cloth and soap when needed.
2) Rinse the prosthesis component with clear fresh water.
3) Dry the prosthesis component with a soft cloth.
7 Maintenance
CAUTION
Failure to follow the maintenance instructions
Injuries due to changes in or loss of functionality and damage to the
product
► Observe the maintenance instructions.
► Inform the patient.
• During the consultation, listen for unusual noises and inspect the entire
prosthesis for damage, wear and functional changes.
• Arrange regular maintenance intervals with the patient depending on the
level of use.
Direct the patient to observe the following maintenance instructions:
14 | Ottobock
Instructions for use reference num­
ber
647G839
Mounting instructions
Please note the 647G840 instructions for use.
The mounting instructions are enclosed with
the product.
The mounting instructions are enclosed with
the respective product.