Positioning The Vending Machine; Warning For Installation; Precausions In Using The Machine; Warning For Scrapping - Necta Vending Solutions SpA Zeta 550-9 Installation, Mode D'emploi, Entretien

POSITIONING THE VENDING MACHINE

The vending machine is not suitable for outdoor installation.
It must be positioned in a dry room where the temperature
remains between 2° C and 32° C, and not where water jets
are used for cleaning (e.g. in large kitchens, etc.).
The machine should be placed away from heat sources
and close to a wall, so that the back panel is at a
minimum distance of 10 cm from it and correct ventila-
tion may be ensured, especially in the compressor
area.
The machine should never be covered with a cloth or
the like.
The machine should be positioned in such a way that it has
a maximum inclination of 2°.
If necessary provide proper levelling by way of the adjust-
able feet included.
Should it become necessary, it is possible to secure the
machine to the floor.
Pre-drilled holes at the bottom of the machine are posi-
tioned as indicated in the drawing below:
Alternatively the machine can be secured to a wall by
means of the special spacer kit ,available as an accessory,
to be fixed to the top of the cabinet.
Fig. 3
CAUTION
When completely filled, the machine has a total static
weight, bearing on the 4 support feet, that varies
between 500 and 700 Kg according to the model.
Therefore, the structure on which the machine stands
must suitable for supporting such weight to avoid any
hazardous conditions, like collapsing, sinking, other
damage or any possible instability.
© by NECTA VENDING SOLUTIONS SpA

WARNING FOR INSTALLATION

Installation and the following maintenance operations
should be carried out by qualified personnel only, who
are trained in the correct use of the machine according
to the standards in force.
The machine is sold without a payment system, therefore
the installer of such a system has sole responsibility for any
damage to the unit or to things and persons caused by
incorrect installation.
The integrity of the vending machine and its conformity
with the rules and regulations in force for its relevant
systems must be checked by qualified personnel at
least once a year.

PRECAUSIONS IN USING THE MACHINE

The following precautions will help protecting the environ-
ment:
- use biodegradable products only to clean the machine;
- adequately dispose of all containers of the products
used for loading and cleaning the machine;
- keep the machine away from heat sources;
- regularly check the condition of the door seal to limit
heat transfer to a minimum;
- limit as much as possible door opening time during
loading operations to avoid temperature increase inside
the cabinet and subsequent increase in power con-
sumption.

WARNING FOR SCRAPPING

Whenever the machine is to be scrapped, the laws in force
regarding environment protection should be strictly ob-
served, more specifically:
- ferrous and plastic materials and the like are to be
disposed of in authorized areas only;
- insulating materials should be recovered by qualified
companies.
- the gas inside the cooling unit, regardless of the type
(see the identification plate), should be recovered by
qualified companies by means of special equipment.
43
01 10 126-03