STEP 3 Replacing the drawer
WARNING!
With the drawer removed, the heating element is exposed. Never turn the unit on while the drawer is
removed. Never let children play near or touch the warming drawer while it is not safely installed. Push the
slides back into the cabinet while the drawer is removed to prevent accidents.
1. To reinstall the drawer, push the slides fully inside.
2. Position the drawer in front of the cavity and align the slides (Fig. 14).
3. With the slides aligned, push the drawer all the way inside (Fig. 15).
NOTE: When the drawer is re-installed, the slides may feel stiff and hard to push in. This is normal.
Pull the drawer back out to realign the rollers. The drawer should now feel smooth and free.
Adjusting the latch
The latch can be repositioned vertically by adjusting the two torx screws. The force necessary to
open and close the drawer can be changed by adjusting the two flathead screws (Fig. 16).
Torx screws
Flathead
screw
Fig. 14
Flathead
screw
Fig. 16
Installation
11
US CA
Fig. 15