Replacing The Drawer - Fisher & Paykel DCS WDU Instructions D'installation Et Guide D'utilisation

CARE AND MAINTENANCE
16
US
CA

REPLACING THE DRAWER

WARNING
With the drawer removed, the heating element is exposed. Never turn the unit on while the drawer is removed.
Never let children play near or touch the warming drawer while it is not safely installed. Push the slides back into the
cabinet while the drawer is removed to prevent accidents.
1. To reinstall the drawer, push the slides fully inside.
2. Position the drawer in front of the cavity and align the slides (Fig. 17).
3. With the slides aligned, push the drawer all the way inside (Fig. 18).
NOTE:
When the drawer is re-installed, the slides may feel stiff and hard to push in. This is normal. Pull the drawer back out to
realign the rollers. The drawer should now feel smooth and free.
Illustration only-handles may vary
ADJUSTING THE LATCH
The latch can be repositioned vertically by adjusting the two torx screws. The force necessary to open and close
the drawer can be changed by adjusting the two flathead screws (Fig. 19).
Flathead
screw
Fig. 17
Torx screws
Flathead screw
Fig. 19
Fig. 18