Schneider LED24-SCP090HDVD Manuel D'utilisation page 65

Notes on recording and USB functions
- Information on the recording format: Recording is done in MPEG-TS format
which allows recording in HD quality identical to the signal received. To play
your recordings on another multimedia device, it may be necessary to install
a compatible video codec.
- If you want to record a film or a long program, use a memory stick of larger
capacity (eg. 4GB). If you want to save several films, opt for external hard
drives of large capacity.
- The loading time of the USB device is too long: When you insert a USB support, the
loading time can sometimes be a minute or more. This depends on the size of your
support, the number of files on it and above all, the complexity of its directories. You
can reduce loading time by avoiding the use of multiple sub- directories in your USB
disk. Avoid such multiple-subdirectories like "Directory/Subdirectory/Sub-
subdirectory/...." and store files in a single simple directory.
USB Device Recognition Problems
- After connecting your USB device to the unit, you may need to turn the device on
before it can be detected.
- This unit does not support direct USB connection with computer. It is necessary for
you to transfer your data/files on a USB stick or MP3 player.
- If you are using an external hard drive to be connected via USB, you must connect
the hard drive simultaneously with a power source and with the unit. If you are using
a portable video player with hard drive, you must make sure that the internal battery
is fully charged.
- Verify that the file system of your USB device is properly formatted in FAT 32. USB
media formatted in NTFS is not compatible with this unit. Please refer to the manual
of your USB device to ensure that formatting is possible without altering its
functionality.
- The USB device used may not be fully compatible with USB 2.0. In this case, try a
different USB stick in order to identify the problem.
Recording Quality
- If your recording is shaky or choppy The data stream to be recorded is very
important. Certain USB sticks, even some new USB 2.0 ones, do not allow sufficient
data transfer rate. If this happens, try with a newer USB device or with an external
hard drive. With external hard drives, data transfer rate is sufficiently high and this
problem should be solved.
63