Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connecting Cables
Connecting to power source
1.The television is in standby state when no images arise and the red
indicating lamp shines.
2. Press the standby button again on the remote control for the television the
indicating lamp becomes green.
Connecting external antenna to the unit
Cable television
We recommend you use a 75Ω antenna cable so as to eliminate the disturbance
caused by impedance mismatching. The antenna cable shall not be bundled
together with the power cord.
Directly insert the 75Ω antenna cable plug into the antenna socket when
applying cable television.
Note: The antenna should be checked periodically. If clear image is not
available, shut down the power and then carefully check the antenna.
100mm
100mm
42
Publicité
Table des Matières
