10-24 x 1
Hex head bolt
1/4-20 x 3/4
INSTALLATION
INSTALLATION OF SIDE BURNER ON CAD1-30 CART
Pages 6 and 7:
STEP 1
STEP 1
Remove the cover, grate, and drip pan from the side burner.
Remove the cover, grate, and drip pan from the side burner.
STEP 2
STEP 2
Attach the two provided 10-24 x 1 hex head bolts to the upper holes of the side panel. Do not completely tighten
Attach the two provided 10-24 x 1 hex head bolts (211338) to the upper holes of the side panel. Do
them yet. Leave an 1/8" space under the bolt head as shown on Fig. 03.
not completely tighten them yet. Leave an 1/8" space under the bolt head as shown on Fig. 01.
STEP 3
STEP 3
Use these two bolts to attach the side burner through the keyholes as shown on Fig. 03.
Use these two bolts to attach the side burner through the keyholes as shown on Fig. 01.
8
2
211328
FIG. 03
Bolts
Keyholes
(211338)
Fig.01
7/16 Wrench
Continued on back