Technical Menu Display - Iberital Expression Pro Manuel D'installation Et De Fonctionnement

IBERITAL
the display will then show:
NOTE
Erasing the total coff ee count does not erase the reading for the litres of water consumed. To eliminate
the alarm for CHANGE/REPLACE FILTER for the litres of water consumed, see the section WATER FILTER
CHANGE/REPLACEMENT ALARM.
- Press the MENU button and the display will show:
showing the number of coff ees by dose and by group.
Continuing to press the MENU button will show the number of coff ees by selection.

2.9.3.1.2. Technical menu display

Remember that to access the Technical MENU, the display must be in the OFF position (the display will show the word
OFF). If it is in the ON position (the display will show the name entered), in order to access the OFF mode, press the I/O
(ON/OFF) and, while pressing it, also press the TWO ESPRESSOS button on the left button pad immediately after
(based on the display used).
Once in OFF mode, in order to access the technical menu, you must press the the MENU button for around 10-15
seconds (based on the display used) and go into technical level programming mode.
86
Coffees total
Total reset
zzzzz GR:
xxxxxxxx
zzzzz:1 espresso, 1 coff ee, etc.
GR: Group 1/2/3
xxxxxxx: Nº of coff ees
INSTALLATION AND OPERATION MANUAL