Iberital Expression Pro Manuel D'installation Et De Fonctionnement page 70

6. Before carrying out maintenance operations, you must
ensure that the machine is disconnected from the power
grid via the switch on the power distribution system.
7. For cleaning operations, follow the instructions contained
in this manual.
8. In the case of anomalies or irregular operation, disconnect
the machine prior to carrying out any maintenance
work. Contact the technical personnel authorized by the
manufacturer.
Repairs to the machine will be carried out by the
manufacturer or an authorized after-sales service centre,
using only original spare parts.
If these conditions are not met, the machine will pose a
danger.
The connection to the power supply must be made via a
switch which meets local safety standards.
9. The electrical supply cable for the machine must be
connected to a switch with a minimum separation
between contacts of 3 mm. This switch must be covered
by an omnipolar circuit breaker.
10. In order to keep the power supply cable from
overheating, ensure that it is totally extended.
11. The mains water pressure to which the coffee machine
must be connected must be between 0.6 and 0.8 MPa.
12. The machine is only suitable for installation in places
where its use and maintenance are restricted to qualifi ed
personnel.
13. The machine must be installed in a horizontal position,
and must NEVER be submerged in water or any other
liquid.
14. The power supply cable must not be repaired or
replaced by the user. Should the cable become damaged,
disconnect the machine from the power supply and
INSTALLATION AND OPERATION MANUAL
IBERITAL
69