Onkyo TX-NR474 Mode D'emploi page 38

> Before Start > Part Names
Pure Audio
This mode reproduces the original sound more faithfully.
The display and analog video circuit are turned off to
provide purer sound.
0 Selecting this mode turns off the analog video circuitry,
so the video signals input through the jacks other than
the HDMI IN jack cannot be displayed on the TV.
Stereo
In this mode, sound is output from the front left and right
speakers and subwoofer.
Studio-Mix
Suitable for rock or pop music, Listening to music in this
mode creates a lively sound field with a powerful acoustic
image, like being at a club or rock concert.
Surround Enhancer
This mode allows you to enjoy sound with a rich sound
field, enveloping you naturally without relying on reflections
from walls. A virtual surround channel is created to give you
a broader sound field.
T-D (Theater-Dimensional)
In this mode, you can enjoy a virtual playback of
multichannel surround sound even when surround
speakers have not been installed. This works by controlling
how sounds reach the listener's left and right ears.
TV Logic
Suitable for TV shows broadcast from TV studios. This
mode enhances the surround effects to the entire sound to
give clarity to voices and create a realistic acoustic image.
Unplugged
Suitable for acoustic instruments, vocals and jazz, This
mode emphasizes the front stereo image, giving the
impression of being right in front of the stage.
38
> Install > Initial Setup
Selectable listening modes
You can select a variety of listening modes to suit the audio
format of the signal being input.
0 Listening modes available when headphones are
connected are Pure Audio, Mono, Direct, and Stereo
only.
Updating of listening modes
We plan to provide support for the Dolby Atmos audio
format through firmware updates for this unit. This means
that the selectable listening modes depend on the version
of firmware.
On firmware version before Dolby Atmos support
0 Dolby Pro Logic II-related modes can be selected.
On firmware versions supporting Dolby Atmos
0 You can select Dolby Atmos, Dolby Surround, and
Surround Enhancer. (Dolby Pro Logic II-related modes
cannot be selected after updating.) Also, when Surround
Enhancer can be selected, T-D (Theater-Dimensional)
cannot be selected.
> Playback
Advanced Setup | Supplementary Information | Others
MOVIE/TV
This is a list of listening modes you can select according to
the audio format of the input signal.
Input format
Analog
*1: A center speaker or surround speakers need to be installed.
*2: Surround speakers or height speakers need to be installed.
*3: A center speaker, surround speakers, or height speakers
need to be installed.
Listening Mode
Direct
Mono
Dolby Surround
Surround Enhancer
*1
PL II Movie
DTS Neural:X
*2
TV Logic
*3
AllCh Stereo
*3
Full Mono
T-D