Menu Items - Sony VPL-HS1 Mode D'emploi

Menu Items

Adjustable items are limited according to the input signals. Items that cannot be adjusted are not displayed in the
menu. (1 page 42)
Menu Item
PICTURE CONTRAST
CTRL
BRIGHT (brightness)
COLOR
HUE
SHARP (sharpness)
RGB ENHANCER
D. (Dynamic)
PICTURE
GAMMA MODE
COLOR TEMP
COLOR SYS (System) Select the color system of the input signal.
VOLUME
INPUT DOT PHASE
SETTING
SIZE H
SHIFT
SCAN CONV (Scan
converter)
ASPECT
Description
The higher the setting, the greater the contrast. The lower the setting, the lower
the cotrast.
The higher the setting, the brighter the picture. The lower the setting, the darker
the picture.
The higher the setting, the greater the intensity. The lower the setting, the lower
the intensity.
The higher the setting, the more greenish the picture becomes. The lower the
setting, the more purplish the picture becomes.
The higher the setting, the sharper the picture. The lower the setting, the softer
the picture.
Adjusts the picture sharpness when computer signals are input.
ON: Emphasizes the black color.
OFF: Reproduces the dark portions of the picture accurately, in accordance
with the source signal.
GRAPHICS: Reproduces the photos in natural tones.
TEXT: Contrasts black and white. Suitable for images that contain lots of text.
HIGH: Gives the white colors a blue tint.
MIDDLE: Gives the white colors a neutral tint.
LOW: Gives the white colors a red tint.
AUTO: NTSC
, PAL, SECAM and NTSC
3.58
Normally, set to this position.
PAL-M/N: PAL-M/PAL-N and NTSC
When the PAL-M, PAL-N or NTSC
set to AUTO, set to this position if the picture is distorted or colorless.
Adjusts the volume. It can be adjusted for each of the inputs selected with the
INPUT button.
When a signal from a computer is input, adjusts the picture for clearer picture
after the picture is adjusted by pressing the APA button.
When a signal from a computer is input, adjusts the horizontal size of the
picture. The higher the setting, the wider the picture. The lower the setting, the
narrower the picture.
As the setting for H (horizontal) increases, the picture moves to the right, and as
the setting decreases, the picture moves to the left. Use < or , to adjust the
horizontal position.
As the setting for V (vertical) increases, the picture moves up, and as the setting
decreases, the picture moves down. Use M or m to adjust the vertical position.
ON: Displays a computer signal according to the screen size. The picture will
be slightly softer.
OFF: Displays a computer signal as it is input. The picture will be clear but the
picture size will be smaller.
Note
When SVGA or XGA signal is input, this item will not be displayed.
4:3: Select when the 4:3 aspect ratio picture is input.
16:9: Select when the 16:9 aspect ratio picture (sqeezed) is input from
equipment such as a DVD player.
(switched automatically).
4..43
(switched automatically).
3.58
signal is input with COLOR SYS
3.58
Menu Configurations
19
GB