Accessories; Repairs; Environmental Protection; Technical Specifications - Metabo BS 14.4 LTX Impuls Mode D'emploi

ENGLISH
ENG
- Preferably in 2nd gear (high speed).
- Activate the pulse function (depending on the
model) to drill steel, aluminium or tiles without
centre punching or pre-drilling.
- Drill tiles and other brittle materials without
impact (depending on the model).
- In the case of deep bores, pull the drill bit out of
the bore from time to time in order to remove the
drill dust or swarf.
Screws
- Preferably in 1st gear (low speed) and with
torque control.
- Before inserting screws with deformed heads
into wood, activate the pulse function
(depending on the model).
- Activate the pulse function (depending on the
model) to reach the maximum torque while
inserting screws.
- The drill chuck can be removed for screwdriving.
Insert the bit directly in the hexagon socket on
the spindle.
With the BS 18 LTX Quick, the screwdriver bit is
held in place by a magnet. Use the clamping
bush for other tools. (The screwdriver bit is
retained if a bit clamping bush (accessory, order
no. 6.31281) is fitted. )
Thread tapping
- Lubricate the dies.
- Select 1st gear (low speed).
- Adjust torque control.

10 Accessories

Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For the dealer to select the correct accessory, he
needs to know the exact model designation of
your power tool.
See page 4.
A Chargers
B Battery packs with different capacities.
Use battery packs only with voltage suitable
for your power tool.
C Clamping ring with bit depot
Slide the clamping ring onto the machine
flange from the front (remove additional
handle (1) if necessary) and push together until
they engage.
D Bit clamping bush
E Chuck with Quick replacement system
F Bit holder with Quick replacement system
G Screw-type angle attachment with Quick
replacement system
For complete range of accessories, see
www.metabo.com or the main catalogue.
10

11 Repairs

Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.

12 Environmental Protection

Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact
with water!

13 Technical Specifications

Explanatory notes on the information on page 2.
Changes due to technological progress reserved.
U = Voltage of battery pack
n = No-load speed
0
Tightening torque for screwing:
M = Soft screwing application (wood)
1
M = Pulse torque
2
M = Hard screwing application (metal)
3
M = Adjustable torque
4
Max. drill diameter:
D = in steel
1 max
D = in softwood
2 max
D = in concrete
3 max
s = Max. impact rate
m = Weight (with smallest battery pack)
G = Spindle thread
D = Chuck clamping range
max
Wear ear protectors!
The stated technical specifications are subject to
tolerances (as specified in the respective current
standards).