Incoming Call Answer; Monitor Doorbells; Broadcast Function - SCS Sentinel PRPVC 2B1 Manuel D'installation

InCOMIng CALL ANSWEAR
when a visitor presses doorbell, all the indoor monitors in this house will chi-
me simultaneously, the LCD will show "INCOMING CALL". Press
with the visitor. the monitor will return to standby state if no one answers
after chime time ends. At ringing and answering state, Press
unlock the door for the visitor, and the LCD will show "DOOR UNLOCKED".
If there is another incoming call when talking with Door 1, the LCD will show
"SOMEONE IS VISITING AT DOOR 2", then press
image to Door 2 and talk with another visitor.
Note: At the state of answering or intercom between monitors, long press
button, the microphone will be mute, and the LCD will show "MUTE", long
press button again the microphone return to normal, and the LCD will
show "PLEASE TALK".

moNIToR dooRBELLS

At standby status, press
change the viewing screen to another video channel.
when monitoring Door bell channel, press
the door bell, and press

BRoAdCAST FUnCtIOn

this function allows you to broadcast information for all monitors in your
house.
At standby state, Long press
REQUESt, the monitor in other rooms will show bROADCAStIng . now you
can make a broadcast.
button to monitor Doorbell 1, press
can talk with people in front of
can open the door.
button , the display will show bROADCASt
to talk
button to
can switch the display
again,
EN ::: 23