Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
2. Q: Sometimes the system takes longer to connect or doesn't
connect at all. Why?
A: In order for a DSM system to connect, the receiver must receive a large
number of uninterrupted signal packets from the transmitter. This process
takes just a few seconds, but if the transmitter is too close to the receiver
(within 4 feet) or near reflective material (metal objects, carbon fiber
material, etc.) it may detect its own reflected 2.4GHz energy as "noise".
This can delay or prevent connection. If this happens, make sure you are
a sufficient distance from metal objects and the receiver itself before you
power up and try again.
3. Q: Is it true that DSM systems are less tolerant of low voltage?
A: All DSM receivers require at least 3.5V to operate normally. Most servos
cease to operate below 3.8V. Using multiple high-voltage servos with an
inadequate power supply can allow voltage to momentarily drop below
3.5V. This will cause the receiver to "brown out" and reconnect. See the
QuickConnect with Brownout Detection section for more information.
4. Q: Sometimes when I power on my DSM system I notice the
receiver won't connect and it needs to be rebound to the
transmitter. Can this happen in flight?
A: No. A DSM receiver cannot be unbound from its transmitter without
specific action by the user.
5. Q: How important is it that I test my system using a Spektrum
Flight Log?
A: All 2.4GHz signals, not just DSM, are affected by proximity to
conductive materials such as carbon fiber or metal. Few RTF and
ARF sport airplanes or helicopters use enough of these kinds of
materials for it to be an issue. If, however, you're flying a sophisticated
model that uses a lot of conductive materials in its construction, a Flight
Log can be helpful. The information it collects when you fly will help you
determine the optimum location for your receiver(s) so you can minimize
the effects of these materials on your signal performance. For more
details on the Flight Log and how it works, visit SpektrumRC.com.
1-Year Limited Warranty
What this Warranty Covers
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the
product purchased (the "Product") will be free from defects in materials
and workmanship for a period of 1 year from the date of purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii)
damage due to acts of God, accident, misuse, abuse, negligence, commercial
use, or due to improper use, installation, operation or maintenance, (iii)
modification of or to any part of the Product, (iv) attempted service by anyone
other than a Horizon Hobby authorized service center, (v) Product not purchased
from an authorized Horizon dealer, or (vi) Product not compliant with applicable
technical regulations.
Publicité
Table des Matières
