Identification - Texas Power Split 2000 VH Guide D'utilisation

Identification

1.) 2" Coupler. Attaches the log splitter to your vehicle. Fits only 2" hitch balls.
2.) Hydraulic Cylinder. The hydraulic cylinder has a 4-1/2" bore and a 23" stroke. It is
rated to
3500 psi.
3.) Control Valve Handle. Use the control valve handle to move the wedge slide
forward and backward.
4.) Wedge. The wedge features wedge wings and a taper that makes splitting easier.
5.) Log Cradle. Keeps the log on the beam without operator assistance.
6.) Beam. The beam is made of 6" wide flange beam (also called I-Beam).
7.) Engine. The air cooled engine powers the hydraulic pump.
8.) Tires. Maximum rated speed is 30 mile per hour.
9.) Gear Pump. The gear pump makes the hydraulic oil flow through the system.
10.) Leg. The leg supports the log splitter while operating. The leg should be raised while
towing(see Operation Instructions).
11.) Safety Chains. A safety feature to prevent loss of log splitter while towing.