Indoor Installation; Portable Levelling Spas - Aquavia Swimspa Fitness Spa Manuel D'installation

INSTALLATION AND ASSEMBLY ENG
The spa should not be left empty and uncovered at
room temperatures over 20ºC or below 4ºC.

3.3. INDOOR INSTALLATION

It is recommended to ensure drainage in the area of the Spa, to prevent water from accumulating
around it and to avoid dangerous access areas for bathers.
Remember that the operation of the Spa causes increased damp and therefore, there must be a
ventilation system to prevent damp from accumulating which could cause damage in the room
where the Spa is located.
The use of a cover reduces heat loss and damp in the room.

3.4. PORTABLE LEVELLING SPAS

Some spas come with an adjustable metal structure to facilitate their installation. This structure
has several points of support. Before filling the spa, these points of support should be adjusted to
ensure they are all in contact with the ground.
7