Electrical Connection - Aquavia Swimspa Fitness Spa Manuel D'installation

ELECTRICAL CONNECTION

ENG
5. ELECTRICAL CONNECTION
ATTENTION – VERY IMPORTANT
• This equipment cannot be connected to a normal plug.
• This equipment requires suitable electrical installation. This should be done by a
specialised fitter following local electrical safety regulations of each country.
• The electrical input of the Spa should always be protected by a highly sensitive
differential. A 30 mA differential is recommended.
• Earthing connection is essential.
• Use a suitable section cable bearing in mind the power of the Spa and distance to
the control panel.
• Always follow instructions given in the Safety Warnings chapter of this manual.
ATTENTION - RISK OF ELECTRIC DISCHARGE
• The electrical supply should be switched off (differential in the OFF position or
disconnect the cable from the mains) before carrying out any work.
• Never try to access an electrical component unless you are qualified or are the
Head of Maintenance.
• Always use suitable personal protection equipment and tools when handling
electrical equipment.
• Never access electrical elements if you are wet, particularly if you have wet feet.
• Do not connect the electrical equipment (differential in the ON position), if the
Spa is empty of water.
13