Babboe Curve Instructions De Montage page 66

Step 7.6
ATTACHING THE CONNECTION PROFILES (FRONT) AND BARS
PARTS
• 2x Connection profile (the shortest steel profiles in box II)
• Sachet H (6x M6 bolts, 6x M6 cap nuts,
6x M6 spring washers, 12x M6 washers)
26
1. Attach both connection profiles (front) to the side panels by inserting a bolt in the
bottom hole (detail P). For now, the middle holes in both panels remain unused.
2. Attach both bars by inserting the nuts, bolts and washers from sachet H in the top
holes in the side panels of the box, as shown in detail O.
Please note
Adhere to the specified order for nuts, bolts and washers, etc. to ensure optimal assembly.
See detail O and P for the correct order.
66
O
P
TOOLS
• Spanner # 10
• Phillips screwdriver