Babboe Curve Instructions De Montage page 58

Step 6
INSTALLING THE BRAKE CABLES
The front brake cables are the only cables that have not been fully pre-installed.
These cables have been pre-installed onto the handlebar, but still have to be attached
to the wheels.
14
1. Guide a cable from the left brake lever on the handlebar via the holders on the left
side of the steering tube and the underside of the front frame (indicated with arrows
in figure 14), to the left front wheel.
Guide the inner cable (2) through the slot in the holder (1) on the underside of the
front frame. Next, also insert the outer cable (3) through here (see detail G).
58
1
G
2
3