Intended Use; Product Features; Technical Data; Noise/Vibration Information - BTI A-BS 12 V Notice Originale

OBJ_BUCH-3429-001.book Page 28 Friday, December 15, 2017 4:05 PM

Intended Use

The machine is intended for driving in and loosen-
ing screws as well as for drilling in wood, metal, ce-
ramic and plastic.
The light of this power tool is intended to illuminate
the power tool's direct area of working operation
and is not suitable for household room illumination.

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Keyless chuck
2 Torque presetting ring
3 Gear selector
4 Battery unlocking button
5 Battery pack*
6 Rotational direction switch
7 On/Off switch
8 Battery charge-control indicator
9 "PowerLight"
10 Handle (insulated gripping surface)
11 Universal bit holder*
12 Screwdriver bit*
* The accessories illustrated or described are not in-
cluded as standard delivery.

Technical Data

Cordless Drill/Driver
Art. No.
Rated voltage V=
No-load speed
-1
– 1st gear min
-1
– 2nd gear min
Max. torque for
hard/soft screwdriv-
ing application ac-
cording to ISO 5393 Nm
Max. drilling dia.
– Steel mm
– Wood mm
Max. screw dia. mm
Chuck clamping
range mm
Weight according to
EPTA-Procedure
01:2014 kg
* depending on the battery pack being used
** limited performance at temperatures <0 °C
28 | English
Cordless Drill/Driver
Permitted ambient
temperature
– during charging
– during operation
and during storage
Recommended
batteries
Recommended
chargers
* depending on the battery pack being used
** limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted sound pressure level of
the product is 71,5 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values a
certainty K determined according to EN 60745-2-1:
Drilling into metal: a
Screwdriving without impact: a
2
K =1,5 m/s
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
A-BS 12 V
a preliminary assessment of exposure.
9 090 291
The declared vibration emission level represents
9 090 221
the main applications of the tool. However if the
12
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
0 – 400
significantly increase the exposure level over the
0 – 1300
total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not ac-
30/15*
tually doing the job. This may significantly reduce
the exposure level over the total working period.
10
Identify additional safety measures to protect the
19
operator from the effects of vibration such as:
7
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
1.0 – 10
0.80
A-BS 12 V
°C 0...+45
**
°C -20...+50
12V x.x Ah L-x
10,8V x.x Ah L-x
LG 12V L-x
LG 10,8V L-x
(triax vector sum) and un-
h
2 2
<2,5 m/s , K =1,5 m/s
h
2
<2,5 m/s ,
h
1 609 92A 497 • 15.12.17