Axis M1054 Guide D'installation page 11

notifications. In addition to the 0 V DC reference point and power (DC
output), the I/O connector provides the interface to:
• Digital output – For connecting external devices such as relays
and LEDs. Connected devices can be activated by the VAPIX®
Application Programming Interface, output buttons on the
Live View page or by an Action Rule. The output will show as
active (shown under System Options > Ports & Devices) if
the alarm device is activated.
• Digital input – An alarm input for connecting devices that
can toggle between an open and closed circuit, for example:
PIRs, door/window contacts, glass break detectors, etc. When
a signal is received the state changes and the input becomes
active (shown under System Options > Ports & Devices).
Power Connector
Mini DC connector. Use the supplied adapter.
Control Button
For location of the control button, see Hardware Overview on page 8.
The control button is used for:
• Resetting the product to factory default settings. See page 19.
• Connecting to an AXIS Video Hosting System service or AXIS
Internet Dynamic DNS Service. For more information about
these services, see the User Manual.
Specifications
Operating Conditions
This Axis product is intended for indoor use.
AXIS M1054 Network Camera
11