Lenz Digital plus RailCom LRC100 Mode D'emploi page 15

If you want to deactivate RailCom (i.e. disable the blanking interval (cutout)), proceed as follows:
•
Change to "PoM"
•
Select CV7
•
Program the value 50 into CV7. This switches the LZV100 into setting mode; again, the LED of
the LZV100 shows a double-flash.
•
You have 15 seconds to program the value 92 for deactivating the RailCom function into CV7.
Again, the LED will shine constantly and RailCom is deactivated.
15
E