Technical Details - Rollei Profi Actioncam Gimbal Mode D'emploi

6. Indicator Light Instruction
6
A Signal Indicator Light
• Constant on: Bluetooth
A • Turn off: Bluetooth
• Flashes twice: Power on/ off
B
B Status Indicator Light
• Flashes once: Panning mode
• Flashes twice: Panning and pitching mode
• Flashes for three times: Lock mode
• Keeps flashing: Low battery/Charging
• LED light constant on: Charging finished
7. Controlling
5-Way Joystick
Middle button: Switch the working mode
• Single Press: Panning Mode Following
• Double Press: Panning and Pitching Mode Following
• Triple Press: Lock Mode Following
• Long press for 6 seconds: Enter the initialization
• Left/Right: Panning angle adjustment
Function Button
• Long press: Power on/off
App Control
• Make sure that your smartphone is connected with
the gimbal. Therefore please follow the instructions
shown in the app.
• Joystick control.
• Setting: Follow Speed, Lock Speed, Rocker Speed,
Blind Angle, Rocker Direction.
8. Working Mode Instruction
Working Mode
Panning Mode
Panning and Pitching
Mode
Lock Mode
ENGLISH
* is connected
®
* is not connected
®
Instruction
The action camera can move to the left or right
smoothly along with the handheld moving. The
pitching and rolling directions are fixed / locked.
The action camera can move to left or right
and pitch up and down smoothly along with
the handheld moving. The rolling direction is
fixed / locked.
The action camera stays in its current position.
The panning, pitching and rolling directions are
all fixed / locked.

9. Technical Details

Material Aluminum
Weight 382 g/338 g (with/without battery)
Folding Size 278x97x40 mm (HxWxD)
Pitching Angle 360°
Rolling Angle 360°
Panning Angle
360°
Charging Voltage 4.5 V – 6.0 V
Operating Time
4 hours
Suitable for GoPro®* Hero®* 5 / 4 and 3 as well as other
actioncams in similar size
(BxHxW up to 62,5x45,8x33mm) and in similar
weight (max. 75–125 g)
10. Calibration (Initialization)
If the gimbal has the following problems, please calibrate it:
• The pitch angle is not levelled with the vertical surface.
• The roll angle is not parallel to the horizontal surface.
• Under the lock mode, the panning angle drifting.
1
5
1
3
4
2 3
6
5
Calibration Operation Instruction:
1. Turn the gimbal on and wait at least 3 seconds.
2. Press the middle button of the joystick of the gimbal for more than 6
seconds until all motors are stopped and the LED indicator light of the
function button will light up and will be constantly on.
3. Put the gimbal into the position which is shown in picture 1 and keep the
gimbal and the platform stationary. Take a look at the LED indicator light,
until the light flashes three times and then remains constantly on. That
means the calibration of this position is finished. Now do the calibration
for the other position, shown in the pictures from 2 to 6.
Attention: Please keep the platform horizontal and after positioning
the gimbal on the platform. Keep the gimbal as well as the horizontal
platform stationary. Put the function button face up in order to take a
look at the LED indicator clearly.
2
4
6