HeathCo HZconnect Guide De Démarrage Rapide page 19

11
IMPORTANT: Before adding the video doorbell to the
app, ensure your mobile device is connected to the
same 2.4 GHz wi-fi network that the video doorbell
will be using. (MUST be 2.4 GHz)
On your mobile device, open the HZconnect app.
Ensure the app is showing the Home screen. If not,
press the Home icon at the bottom of the screen.
To add a device, press the "+" icon at the top of the
Ensure "Add Manually" is selected at the top of the
Select "HeathZenith" in the left-hand column and
Press NEXT on the video help screens FOUR times.
Press CONFIRM and then NEXT.
Enter the login information for your 2.4 GHz wi-fi
Hold up QR code displayed on phone screen to the
camera of the video doorbell and wait for a chime.
After the chime, the button will flash blue to indicate
the video doorbell is connecting to your network.
When the button turns solid blue, the video doorbell
Add Video Doorbell To Your App
then select "Doorbell".
is ready to use.
screen.
screen.
network.
19