HeathCo HZconnect Guide De Démarrage Rapide page 14

8a
Wire The Power Module
Ensure that orange arms on quick connectors are
completely upright, 90 degrees to gray body. Some
force may be necessary.
TRANS FRONT
fig.5b
fig.5a
Insert the wire you labeled "TRANS" into one quick
connector opening (ANY opening) and lower the
orange arm until flush with the gray body. You will
have room for one more wire on this quick connector.
Set aside (fig. 5a).
Insert the wire you labeled "FRONT" into the 2nd
quick connector (ANY opening) and lower the orange
arm until flush with the gray body (fig. 5b). You will
have room for one more wire on this quick connector.
Set aside.
14