Battery Compartment; Battery Charge; Front Light; User Warnings - Nilox Doc X2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The current regulator automatically cuts off the electricity supply in the event of overvoltage,
re-establishing it when the electrical load is restored.
Do not use the PAS in the rain or on excessively uneven ground.
Turn off the PAS before stopping DOC E-BIKE X2, the last few pedal strokes should therefore
be made without electrical assistance.
BATTERY

BATTERY COMPARTMENT

The battery of X2 is installed inside the frame and it is
removable.
To get access to it, please unlock the lever that locks/unlocks
the frame (point 3 in picture) and remove the battery.

BATTERY CHARGE

The battery of the DOC E-BIKE X2 can be charged:
Directly on the bike, without taking the battery
out.
Taking the battery out and taking it home or to a
place equipped with electrical outlet.
Insert the power supply plug into the power inlet, placed on
the battery.

FRONT LIGHT

DOC E-BIKE X2 is equipped with a 5-LED torch powered by common
alkaline batteries.

USER WARNINGS

Carefully heed the following warnings for use. Use DOC E-BIKE X2 sensibly and responsibly.
DOC E-BIKE X2 is a pedal assisted means of transport.
DOC E-BIKE X2 is a hi-tech product, but its incorrect and inappropriate use can cause injuries. In order to
reduce any type of risk, we recommend you carefully heed the following warnings:
Always wear shoes, a helmet and appropriate safety equipment. Using a firmly buckled helmet
that provides cranial protection is recommended.
Do not use DOC E-BIKE X2 without proper training, please read the manual before use.
Its use is not recommended for pregnant women.
EN
6

Publicité

Table des Matières
loading

Table des Matières