Philips Elance GC3035 Mode D'emploi page 7

Drip Stop (types GC3035, 3030, 3027, 3025, 3020, 3017, 3015
only)
This iron features a "Drip Stop" steam shut-off facility: the iron
automatically stops steaming at too low temperatures to prevent water
from dripping out of the soleplate.When this happens you may hear a
sound.
Vertical Shot of Steam (types GC3035, 3030, 3027, 3025, 3020,
3018, 3017, 3016, 3015, 3012, 3010 only).
C
1 The Shot of Steam function can also be used when you hold
the iron in vertical position.
Never direct the steam towards people.
Automatic Anti-Calc (types GC3035, 3030, 3027, 3025, 3020,
3018, 3016 only).
C
1 The built-in Automatic Anti-Calc system reduces deposit of
scale and ensures a longer life of the iron.
Auto-shut-off (types GC3035, 3027, 3018, 3017, 3012 only)
C
1 An electronic safety device will automatically switch off the
iron if it has not been moved for a while.
To indicate that the iron has been switched off, the red auto-off
pilot light will start blinking.
To heat up the iron again:
- Pick up the iron or move it slightly.
- The red auto-off pilot light will go out.The amber temperature pilot
lightmay come on, depending on the soleplate temperature.
- If the amber pilot light comes on after the iron is moved, wait for it to
go out before start ironing.
- If the amber pilot light does not come on after the irom is moved, the
iron is ready for use.
ENGLISH
7