Getting Started - Kenwood KDC-HD262U Mode D'emploi

GETTING STARTED

1
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB"
1
Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock
1
Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [CLOCK], then press the knob.
3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6 Turn the volume knob to select [12H] or [24H], then press the knob.
7 Press and hold to exit.
To return to the previous setting item, press
3
Set the initial settings
1
Press repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4 3
Repeat step until the desired item is selected or activated.
5
Press and hold to exit.
To return to the previous setting item, press
4
AUDIO CONTROL
SP SELECT
DISPLAY
EASY MENU
TUNER SETTING
PRESET TYPE
SYSTEM
KEY BEEP
SOURCE SELECT
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 8)
IHEART SRC
BUILT-IN AUX
CD READ
.
F/W UPDATE
UPDATE SYSTEM / UPDATE HD
F/W UP xx.xx/
F/W UP Vxx
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned
.
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size
(5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for
optimum performance.
ON: Both display and button illumination change to white color when
entering [FUNCTION]. ; OFF: Both display and button illumination
remain as [COLOR SELECT] color. ( 11)
NORMAL: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ AM). ; MIX: Memorizes one station for each preset
button, regardless of the selected band.
ON: Activates the keypress tone. ; OFF: Deactivates.
ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 9)
ON: Enables AUX in source selection. ; OFF: Disables. ( 10)
1: Automatically distinguishes between audio file disc and music CD. ;
2: Forces to play as a music CD. No sound can be heard if an audio file
disc is played.
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
off. ; OFF: Cancels.
Default: XX