Citizen CH-452 Manuel D'utilisation page 15

is displayed soon after
Ã
pressurization is complete, and
measurement begins automatically.
* If the unit judges that pressurization
is insufficient, it automatically
repressurizes.
blinks each time a pulse is
Ä
detected, and the pressure value
is displayed on the diastolic blood
pressure display.
Once measurement is complete, the
Å
cuff deflates and the measurement
results (systolic/diastolic blood
pressure values, pulse) are displayed.
* Systolic/diastolic blood pressure values
(two seconds) and pulse (one second)
are displayed alternately.
* Provided there is no error in the
measurement results, they are stored
automatically.
Finishing measurement.
Î
MEASURING YOUR BLOOD PRESSURE
START/STOP Switch
-
Eng 15
• Press the "START/STOP" switch to
turn the monitor off.
* When you want to stop measurement,
press the "START/STOP" switch. The
cuff is deflated and measurement
stops.
-